Rubik's Cube: a solve that staysLesson 3about 14 minutes
The white cross
The first real step — and the only one you will never need an algorithm for.
Thirty seconds, from memory
Name the three states a piece can be in. And: the white-red edge is sitting in slot DL — where does it belong, and how do you know?
Answer out loud first, then check
Solved, twisted, displaced. The white-red edge belongs at UR — the one slot touching both the white and red centres. You know because its colours are its address.
1. What “the white cross” actually means
The goal is the four white edges — white-green, white-red, white-blue, white-orange — each solved: right slot, right way round. That is the whole target, and you already have the vocabulary for it from last lesson.
A white cross on the white face is not enough. Four white stickers can form a perfect cross while every piece is in the wrong slot. Those pieces are oriented but displaced — the exact distinction from Lesson 2. The cross is only real when each edge’s second colour also matches its centre.
This is the single most common beginner mistake, and it is why the step is usually taught badly. You are not making a white plus-sign. You are delivering four pieces to four addresses.
2. Hold it white-down
Turn the cube over: yellow centre up, white centre down. Keep it that way for the whole lesson. You build the cross on the bottom, where it will stay for the next step too — no flipping later.
Building on the underside sounds awkward, and it would be, except that you are about to build it on the top and drop it down. That is the trick, and it is the reason this step needs no algorithm.
The on-screen cube below is drawn the same way you are holding it — the face marked
U shows yellow, and the cross forms on D. Once you turn the cube
over, which colour ends up facing you is irrelevant and will differ from the screen.
Every rule below is stated against centres, never against specific colours, so it holds
whichever way round you are holding it.
3. The one rule — and why it is true
Suppose the white-green edge is sitting on top at UF, white facing up, green facing you. Now turn the front face a half-turn: F2.
| Before F2 | After | Why |
|---|---|---|
| Piece at UF | Piece at DF | A half-turn of F swaps the top and bottom of that face |
| White on U | White on D | The up sticker becomes the down sticker |
| Green on F | Green still on F | Turning a face never moves a sticker off that face |
The rule: get a white edge into the top layer with white facing up, turn the top until its other colour sits directly above the matching centre, then turn that face 180°. The piece drops into the cross, correctly oriented, every time.
Notice you did not memorise that. It follows from one fact you already had — a face turn keeps its own stickers on itself — plus one you can see. If you ever forget this step, you can rebuild it from scratch in about ten seconds. That is the entire point of how this course is being taught.
And it cannot break what you have already done. Dropping a piece through the front face only disturbs UF and DF in those two layers — and DF is the home of exactly one piece, the one you are putting there. The other three cross edges are untouched. Checked against 4,000 random scrambles and 2,965 drops: not one of them ever undid a finished edge.
4. The daisy
So the job reduces to: get all four white edges to the top with white facing up. With yellow on top, that looks like a flower — a yellow centre with four white petals. Hence the name.
Phase A — make the daisy. Find a white edge anywhere on the cube and work it up to the top layer so its white sticker points at the ceiling. Ignore the other colour entirely for now. Repeat until four white petals surround the yellow centre.
This part is fiddling, not algorithm, and it is meant to be. If you knock a petal out, put it back — you cannot do permanent damage, because nothing is finished yet. Turn the top layer freely to park petals out of the way; U never disturbs anything below.
Phase B — drop them. One at a time: turn U until a petal’s side colour sits above its matching centre, then half-turn that face. Four drops, four edges, cross done.
5. Practise it here
Use this when the cube isn’t in reach — or right now, alongside it. The counters are live: Daisy counts white petals on top, Cross counts cross edges genuinely finished. Get Cross to 4.
How many cross edges are actually finished?
White is on the bottom. Count only the edges that are fully solved — white on the bottom and the side colour matching its centre.
Round 1 of 6 · 0 correct
Before the next lesson
- Do it three times. Scramble properly, build the cross, scramble again. Three full crosses is the goal — not speed, just the loop of scramble → look → daisy → drop. The third one will feel different from the first.
- Watch: J Perm’s White Cross step. He builds it white-up rather than using the daisy, so it will look different — watch it anyway. Seeing a second route to the same target is what stops you depending on one recipe.
- Keep: the White Cross card — the rule, the reason, and the two phases on one printable page.
Quiz
Score: 0 / 0 · 0 of 5 answered
Answer from memory, then check.
When is the white cross finished?
Four white stickers can form a cross with every piece in the wrong slot. Each edge's second colour must match its centre too.
How do you hold the cube while you build the cross?
Yellow centre up, white centre down. You build the daisy on top and drop each edge to the bottom.
A white edge sits on top, white up, its side colour above the matching centre. What do you do?
A half turn drops it into the cross, the right way round. A face turn never moves a sticker off that face.
Why can a drop never break a cross edge you have already finished?
The drop only moves UF and DF on that face, and DF is the home of the piece you are putting there.
What is the daisy?
A yellow centre with four white petals. Getting all four white edges there is Phase A; dropping them is Phase B.
Read next
Next lesson: the first layer corners — where R U R' U' finally earns its keep. The sequence you have been idly turning is the exact tool for that step, and you will find out what it actually does.
Take this lesson home
Scan the code or type the link to work through the lesson and its quiz at your own pace.
Your answers are saved only in this browser, so you can pick up where you left off.