Rubik's Cube: a solve that stays · Reference

Second layer card

The compressed essence of Lesson 5. After a gap, read this — not the lesson.

Hold

Yellow centre up, white centre down, first layer already finished. You always fill the front-right or front-left middle slot; turn the whole cube to bring the slot you want to the front.

Target

The four edges with no yellow and no white — green-red, red-blue, blue-orange, orange-green. With white already down, the test is just: no yellow means middle layer.

The rule

U until a no-yellow top edge has its front sticker matching the front centre. Then read its top sticker.

Top sticker matchesInsertSequence
The right centreRight U R U' R'  U' F' U F
The left centreLeft U' L' U L  U F U' F'

The stuck case

No usable top edge means the remaining ones are already in the middle layer, wrong slot or flipped. Bring one to the front right and run the right insert once with anything on top — it is thrown up into the top layer. Same on the left with the left insert.

How to rebuild it if you forget it

HalfWhere it comes fromWhat it does
U R U' R' The first-layer opener R U R' U', inverted — reverse the order, flip every direction Lifts the bottom-front-right corner out, opening the column
U' F' U F That same shape mirrored onto the front face — R becomes F, directions flip again Carries the edge into the slot and drops the corner back beneath it

The left insert is the whole thing reflected left-to-right: R becomes L, the front face stays put, every direction reverses. Open, carry, close — twice, in a mirror.

Checks

  • Before inserting: say the edge’s two colours and the slot they name.
  • After each edge: the first layer must still be a full white face plus solid side bands.
  • Layer finished: two solid bands of colour around all four sides, and only yellow-carrying pieces left loose on top.

Lesson 5 · Corners card · Cross card · Addresses card · Notation card